G1 FAL with Stripper clip top cover and 10 round fixed magazine.
Stripper clip top cover, a 10 round magazine, and a modified magazine catch.
Click on photo thumbnails to display larger picture.
Click link to go to DIY Mag catch page: DIY fixed magazine catch
Loading rifle with stripper clips:
Click on photo thumbnails to display larger picture.
Stripper clip top cover & 5 round stripper clips were purchased from DSA Inc.
 |
Stripper clip top cover: US035STP |
|
7.62 Stripper clips: 880 |
|
SA58 T48 replica: SA58 T48 Replica |
Receiver cut outs for Stripper clip top cover:
Click on photo thumbnails to display larger picture.
FAL receiver is an Entreprise Arms Metric Type 1 with G1 markings.
I also had some custom machining done on the receiver for the Stripper clip top cover. Entreprise Arms CNC'd the receiver with top cover tab relief cuts and Inch type sand cuts. Saves me from having to do it myself on a mill or with a Dremel WECSOG style.
|
Stripper clip dust cover slips in like other standard dust covers, except it has some TABS in the rear to hold it in place in the receiver. Tabs slide into and lock into the notches cut into the receiver. INCH pattern receivers should have these notches cut into them, but METRIC receivers need these notches cut into them. |
|
You can see the notches in the second photo. |
|
In the third photo, you can see how the tabs from the cover, lock into the notches in the receiver. |
|
Right side view of the receiver cuts for the dust cover. |
|
Left side view of the receiver cuts for the dust cover. |
FAL Links
| |
| |
| |
| |
|
REDHORSE
Text and Pictures Copyright 2001-2009 © Web Shooters TERMS
Webmaster email: webmaster
This site was last updated 01/11/09
